Download Pdf

MODULINE
Online UPS ( 10 - 100 KVA)

ON-LINE PROTECTION FOR COMPUTER SERVERS


Moduline Construction Design
Moduline supports up to 8 UPS modules which provide the total capacity of 80 KVA, and
it is designed to each UPS modules that can be hot-swapped easily. The system also
comes with other modules including communication modules, LCD panel, and cabinet.
Each module is running independently. If any module is failure or disconnected, the
system keeps continuing to operate and supply the power without interruption. Moduline
ensures to provide a high level of reliability and protection.

LCD SCREEN DISPLAY

Moduline is equipped with mimic LCD screen in the front panel for displaying all necessary information and status, such as input or output vrating, capacity, temperature. And it also displays in multi-language for different countries.

EASY OF OPERATION AND INSTALLATION

Moduline offers flexibility to install that reduces installation time. Consequently, it is very easy maintenance and Control which provides the highest reliability and best protection for supplying power.

SELECTABLE CHARGING CAPACITY

Each UPS module builds in with 4.5Amp charger. With 8 installed UPS Modules, the total charging current is up to 36Amp. With this
Advanced charger, you can install the external battery cabinet to extend the battery run time without limitation. Moreover, if the total
charging current is too big to the installed battery system, you are also able to disable some of these chargers on LCD display with
reasonable charging current without reduce the Battery lifetime.

SELECTABLE CAPACITY FOR PARALLEL REDUNDANCY

In order to make sure the additional modules are installed for parallel redundancy, you could access the LCD Display to setup the
quantity of UPS module for parallel redundant capacity. Once the connect loads are exceed to the setup capacity, the system will have
the warning message for your previous actions.

PDU-SIMPLIFY THE POWER DISTRIBUTION CONTROL

With FRONT-ACCESS design, the operator can control the power distribution just in front. 0f the UPS system, monitoring the load status
via the LCD display just below the PDU. The PDU provides breaker panel capable of Holding 36 pieces miniature circuit breaker (MCB).
The user can configure the power distribution wiring as 1Phase 2 wire + Protective Earth (PE), 2 phase 3 wire + PE, 3 phase 4 wire +
PE, conveniently.

ADDITIONAL OUTSTANDING FEATURES:

  • High Input Power Factor for Over 0.99
  • Equipped with DSP Innovative Technology Application
  • Add up External Battery System
  • Dual Communication Interface
  • Available for Generator Input
  • With Specialized Monitoring Software to Monitor or Remote Control the System
  • Wide Input Range
  • Cold Start
  • High Efficiency
  • Short Circuit Protection
  • Support SNMP Application (Option)
  • Support AS400 Dry-Contact Interface (Option)